| Check evaporator coil |
Lubricate fan motor |
Set manifold pressure |
| Monitor expansion valve |
Check start and run capacitors |
Test fan limit switch |
| Clean evaporator drain |
Check start and run delays |
Clean blower wheel |
| Adjust bypass dampers |
Monitor refrigerant level |
Inspect valves |
| Inspect filters |
Adjust operating pressures |
Check flue |
| Tighten electrical connections |
Measure voltage differences |
Check flame baffle |
| Evaluate safety controls |
Measure amperage draw |
Inspect combustion chamber |
| Measure temperature difference |
Clean and adjust burners |
Inspect heat exchanger |
| Clean condenser coil |
Evaluate vent system |
Test thermocouple |
| Adjust thermostat calibration |
Set burner adjustment |
Check combustion air |
| Check fan blades for tightness |
Measure gas input |
|